Answers are grounded in this paper and cite their sources.
AISI H13 tool steel is extensively utilised in moulding sector; however, its hard machining poses numerous challenges due to the considerable thermal and mechanical stresses that can modify the material’s mechanical properties. Attaining optimal surface characteristics during hard machining of AISI H13 is essential for improving the performance of the final product. Recently, the use of liquid nitrogen in machining processes has garnered interest because of its environmentally sustainable properties. Although there is a scarcity of comprehensive studies in the literature concerning surface modifications during the cryogenic turning of AISI H13, the present research conducts a comparative analysis of cryogenic and dry machining of this steel. The study examined various parameters of surface alteration, including white layer thickness, microhardness, and overall surface quality. The results of this comparison are well-supported by scientific explanations to enhance the understanding of the machining process. Cryogenic machining led to increased surface hardness and a reduction in white layer thickness, signifying an overall enhancement in surface quality when compared to dry machining conditions. For example, an increase in the depth of cut resulted in a 223% rise in white layer thickness under dry conditions, whereas only a 46% increase was observed under cryogenic conditions.
No takes yet. Share an insight, caveat, or question.
Jafarian et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: