Answers are grounded in this paper and cite their sources.
Residual charge accumulation and electric‐field attenuation during vertical stacking have long limited the achievable height of ordered microfibers in electrohydrodynamic (EHD) printing. To address these limitations, we develop a segment‐wise adaptive noncontact electric‐field‐driven (NEFD) 3D printing strategy empowered by a closed‐loop feedback‐controlled mechanism integrating dynamic voltage regulation and a preset lifting allowance. Here, the high‐voltage electrode is decoupled from the printing material and the substrate, fundamentally cutting off the direct charge injection pathway. Specifically, the segment‐wise strategy dynamically corrects the preset layer height based on the measured average layer height of preceding scaffold segments and adjusts the printing voltage in real time through a linear fitting function, effectively compensating for field loss. Compared with conventional EHD printing at 5000 V, the NEFD approach reduces the residual charge density of deposited fibers to 15.7%. Moreover, integrating the preset lifting allowance with dynamic voltage regulation consistently maintains nozzle‐to‐structure spacing and electric‐field strength during printing. This synergistic strategy enables the production of ordered microfiber structures with a 20 µm line width and 10.00 ± 0.25 mm maximum height. Our findings provide a robust route for overcoming the height ceiling in microscale fiber‐based additive manufacturing, paving the way for high‐fidelity tissue scaffolds and functional microdevices.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: