Answers are grounded in this paper and cite their sources.
The corrosion-inhibition behaviour of [(1E,8E)-9-(4-chlorophenyl)-1,8-bis(2-(2,4-dinitrophenyl)hydrazono)-3,3,6,6-tetramethyl-1,2,3,4,5,6,7,8,9,10-decahydroacridine], an acridine-2,4-dinitrophenylhydrazone derivative, was evaluated for mild steel in hydrochloric acid using the gravimetric weight-loss method. Mild-steel coupons were polished, cleaned, weighed, and immersed in uninhibited acid and acid solutions containing selected inhibitor concentrations. Weight loss was recorded at three-day intervals over 30 days, and inhibition efficiency and surface coverage were calculated from the corrosion-rate data. The uninhibited system showed relatively stable weight loss throughout the exposure period, confirming the corrosive nature of the acid medium. The inhibitor reduced weight loss most effectively at 2 ppm, where inhibition efficiency remained between 72.73% and 75.13%. At 6 ppm, inhibition efficiency decreased to 29.27–33.71%, whereas at 10 ppm it decreased further to 14.99–17.34%. Surface-coverage values followed the same pattern, with the highest values at 2 ppm and lower values at the higher concentrations. These findings indicate that the tested compound reduced mild-steel corrosion under the experimental conditions, with the best performance at the lowest tested concentration. Nevertheless, the concentration-dependent decline in performance requires further investigation. Electrochemical measurements, adsorption-isotherm analysis, replicated experiments, and surface-characterisation studies are required to clarify the inhibition mechanism and confirm the reproducibility of the observed behaviour.
No takes yet. Share an insight, caveat, or question.
Awaka-Ama et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: