Answers are grounded in this paper and cite their sources.
This paper presents a computed design study of a geothermal energy system on a single stated operating principle: flooded abandoned mine workings are a man-made aquifer held at a stable temperature by the ground around them; pumping that water through heat pumps lifts its low-grade heat into a district network, so a mining town's exhausted asset becomes its heating utility, and the water is returned to the workings cooled to be warmed again by the rock. The system is a mine-water discharge of 85 kilograms per second at 19 degrees Celsius, cooled to 9 degrees Celsius through heat-pump evaporators, delivering heat at a 58 degree supply temperature to a district network, with performance carried as a stated fraction of the Carnot bound between source and supply. The design target is the delivered heat, the electrical demand of the lift, and the number of homes the delivered duty serves at a stated per-home design load — the three numbers on which a mine-water heating scheme is actually judged. The delivered heat is 5.01 megawatts at a coefficient of performance of 3.46 against a Carnot bound of 7.53 for the same temperatures, drawing 1447 kilowatts of electricity, and an annual heat delivery of 21.9 gigawatt-hours at the stated capacity factor. The purpose throughout is civilian energy supply: electricity for grids and facilities, or heat for buildings, food production and industry. Nothing in the design is optimized for any other use, and the study has no targeting or weapon application. It is a computed study; every performance figure is simulated from the stated assumptions, not measured.
No takes yet. Share an insight, caveat, or question.
William Alexander Aldred (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: