Answers are grounded in this paper and cite their sources.
In this study, accelerated corrosion tests simulating marine atmospheric exposure were conducted on Q355 steel specimens of different thicknesses, and their mechanical property degradation was evaluated through uniaxial tensile testing. A quantitative relationship between mechanical property parameters and mass loss rate was established, enabling the prediction of mechanical property degradation of Q355 steel considering both plate thickness and time-varying corrosion effects. The results indicate that the specimen surface gradually lost its metallic luster during corrosion and developed dark yellow corrosion products. In the midstage of corrosion, pits deepen and interconnect along the plate thickness, whereas in the later stage of corrosion, large-scale corrosion pits form, resulting in pronounced variations in surface morphology. The necking phenomenon of the fracture of the specimens after corrosion damage was not obvious, and the tearing morphology at the fracture edge changed from prismatic to triangular pyramidal, leading to reduced ductility. Corrosion damage causes decreases in both yield strength and ultimate strength. This degradation was faster in thinner plates, whereas partial plasticity was preserved in thicker plates. The elastic modulus decreases approximately linearly with increasing mass loss rate, and elongation after fracture is highly sensitive to local corrosion damages. The absolute prediction error was less than 10%, indicating that the proposed predictive model can be used to describe the degradation law of mechanical properties of Q355 steel in marine corrosive environments.
No takes yet. Share an insight, caveat, or question.
Wei et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: