Answers are grounded in this paper and cite their sources.
This paper presents a lightweight, wearable exoskeletal robot designed for upper extremity stroke rehabilitation. The device aids in repetitive treatment sessions, both at home and in clinical settings, by enhancing mobility and enabling patients to perform everyday tasks while standing or sitting. With a focus on intensive physical rehabilitation, this eight-degree-of-freedom exoskeleton incorporates a sophisticated control system and integrated biofeedback to improve the efficiency and effectiveness of therapy This paper presents a lightweight, wearable exoskeletal robot designed for upper extremity stroke rehabilitation. The device aids in repetitive treatment sessions, both at home and in clinical settings, by enhancing mobility and enabling patients to perform everyday tasks while standing or sitting. With a focus on intensive physical rehabilitation. The MATLAB system identification technique is used to build the joint's actuator model, enabling an examination of the exoskeleton's dynamics. The exoskeleton is modelled in three dimensions using SolidWorks software. In addition, SimMechanics is used as a simulation approach. Afterwards, we verify the model through simulation, integrate it with a MATLAB-Simulink control model, and test it in payload. The results suggest that the model effectively verifies the controller's ability to accurately follow the exoskeleton's trajectory in simulation. The RMS inaccuracy of the joint angle is minimal and closely approximates the desired input of the joint showing the maximum RMS value 2.2 deg in shoulder internal/external rotation.
No takes yet. Share an insight, caveat, or question.
Ali et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: