Answers are grounded in this paper and cite their sources.
This paper presents an experimental investigation into the properties of concrete produced using recycled coarse aggregate (RCA) in combination with rice husk ash (RHA) and polypropylene (PP) fibre. Despite the growing emphasis on sustainable construction materials, limited studies have comprehensively examined the synergistic effects of surface-treated RCA, RHA incorporation, and PP fibre reinforcement on concrete performance. To address this gap, RCA obtained from construction and demolition (C&D) waste was treated with hydrochloric acid (HCl) and subsequently coated with RHA to fill the pores of the old adhered mortar, employing a two-stage mixing approach (TSMA). RHA was used as a partial cement replacement on a mass basis at levels of 5%, 10%, 15% and 20%, while PP fibre was added at a constant 0.5% volume fraction as reinforcement. Mechanical testing revealed that the inclusion of PP fibre had a limited effect on compressive strength but significantly enhanced tensile strength. The mix containing 10% RHA achieved a 3.27% increase in compressive strength and a 15.02% increase in tensile strength compared with the control mix after 28 days of curing. Statistical analysis using one-way ANOVA confirmed that the observed differences in compressive strength between mix groups were statistically significant at all curing ages [28-day: F(4,10) = 12.184, p = 0.0007]. Additionally, durability was assessed through acid attack and non-destructive tests (rebound hammer and ultrasonic pulse velocity), which indicated a dense and relatively uniform microstructure with reduced internal defects in concrete containing 100% RCA and 10% RHA.
No takes yet. Share an insight, caveat, or question.
Gaurav Chand (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: