Answers are grounded in this paper and cite their sources.
Background: Prosthetic liners couple soft residual-limb tissues to a comparatively rigid socket. Their mechanical response may modify loading and suspension, while limited heat and vapor transfer can complicate prolonged wear. Material-family labels are often used in prescription despite marked product-to-product variation. Objective: To examine what published comparisons actually establish about silicone, thermoplastic elastomer (TPE), and polyurethane (PU) liners, and to distinguish measurable material differences from unproven clinical assumptions. Methods: This critical narrative review integrates selected peer-reviewed investigations of liner compression, shear, tension, friction, and thermal conductivity. Evidence is organized by test domain and clinical relevance. Because no exhaustive database screening or formal risk-of-bias procedure was completed, the synthesis is not described as systematic. Findings: In one commercial-product comparison, mean compressive tangent moduli were 310 ± 100 kPa for silicone, 140 ± 30 kPa for TPE, and 300 ± 40 kPa for PU; corresponding shear values were 69 ± 17, 21 ± 5, and 63 ± 3 kPa. Reinforcement strongly affected tensile response, and tested PU products had comparatively low friction. These results describe particular products and protocols, not intrinsic polymer constants or demonstrated patient-outcome advantages. Conclusion: A polymer-only ranking cannot guide reliable prescription. Clinical selection requires consideration of construction, socket fit, suspension, tissue condition, activity, moisture, and patient-reported experience. Comparative patient-level studies remain necessary.
No takes yet. Share an insight, caveat, or question.
Rout et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: