Answers are grounded in this paper and cite their sources.
Materials‐based hydrogen storage has gained attention due to the limitations of storing hydrogen as a gas or liquid. In this study, geopolymers were explored as a hydrogen storage medium for the first time by systematically varying their Si:Al:Na/K ratios and gradually introducing Ca. The hydrogen adsorption performance was evaluated at −20, +25, or +40 °C and hydrogen pressures up to 100 bar. The Ca‐free compositions exhibited better performance in comparison to the Ca‐containing ones. Furthermore, the Na‐based geopolymers could adsorb more hydrogen than the K‐based geopolymers. For the Ca‐free geopolymers, hydrogen adsorption increased with increasing Si/Al ratio and was positively correlated with specific surface area and pore volume, but negatively correlated with average pore size. The best performance was achieved with the composition Si 20 Al 1 Na 1 which had the gravimetric hydrogen adsorption capacity of 0.64 wt.% at −20 °C and 100 bar. Even though the result is below the practical target value of 6.5 wt.% as defined by the U.S. Department of Energy, geopolymers outperformed similar zeolites when comparing to the earlier literature. Additionally, the Si 20 Al 1 Na 1 composition demonstrated excellent stability over multiple adsorption/desorption cycles. The results of this study can be used to further develop geopolymers as hydrogen storage media via chemical modifications or hybrid systems.
No takes yet. Share an insight, caveat, or question.
Hossain et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: