Answers are grounded in this paper and cite their sources.
Suction anchors used as mooring foundations for floating offshore wind turbines are subjected to inclined pullout loads. The surrounding sandy ground may also liquefy during earthquakes. In this study, 1 g model tests were conducted to clarify the characteristics of the inclined pullout resistance of suction anchors in liquefied sandy ground. Tests were performed in non-liquefied ground and in ground statically liquefied by upward seepage. The effect of pullout velocity was also examined. The results showed that the peak pullout load increased with pullout velocity in both liquefied and non-liquefied ground. This increase was more pronounced in liquefied ground. Substantial post-peak pullout resistance remained in liquefied ground. Furthermore, pore water pressures inside and outside the anchor, in-plane normal strain at the ground surface, and underwater images supported an interpretation involving two resistance mechanisms in liquefied ground. These were resistance due to passive suction caused by the pressure difference between the inside and outside of the anchor, and passive resistance associated with the recovery of effective stress and shear resistance in front of the anchor. Pore water migration played an important role in the development of both resistance mechanisms.
No takes yet. Share an insight, caveat, or question.
Kamura et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: