Answers are grounded in this paper and cite their sources.
With oilfields entering the high water cut stage, oil–water emulsions become increasingly stable, while traditional demulsifiers suffer from low efficiency and poor adaptability when treating acidified oily wastewater. In this work, a magnetic porous carbon (MPC) was employed as the substrate, and a novel demulsifier SDS&SO@MPC with a hydrophobic core–hydrophilic shell structure was fabricated via double‐layer surfactant modification. Different from most reported single‐surfactant‐modified magnetic demulsifiers, this dual‐surfactant design realizes synergistic improvement in interfacial activity, amphiphilic wettability, acid and high‐salinity tolerance. At 35°C, 300 mg/L dosage, and 20 min demulsification, the demulsification efficiency reached 98.7%, remarkably superior to three commercial demulsifiers. The material maintained stable efficiency (97.56%–99.87%) over 0–10,000 mg/L salinity and performed optimally near pH 3.6 (isoelectric point). After five cycles, the demulsification efficiency still remained at 88.5%. The dual modification endowed excellent interfacial activity and suitable wettability. Coupled with adsorption and magnetic separation, efficient demulsification was achieved via interfacial film disruption, charge neutralization, and droplet coalescence. SDS&SO@MPC shows great potential for acidic and high‐salinity oily wastewater treatment, offering a new strategy for oilfield produced water purification.
No takes yet. Share an insight, caveat, or question.
Meng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: