Answers are grounded in this paper and cite their sources.
This paper proposes a computationally efficient framework for the simulation of nonlinear joint dynamics in complex industrial assemblies where friction-induced micro-motions have significant influences on system behavior. The proposed method combines FEA, Craig-Bampton sub-structuring, and the Jenkins friction model within an HBM solver enhanced by an AFT scheme. Sub-structuring was used to reduce the full FE model of the "Harmony" assembly from 1.2 million DOFs to 2,150 (a reduction of 99.8%) and succeeded in isolating the joint nonlinearities. The solution for nonlinear responses was obtained by HBM, while the path-following continuation method was employed to trace the amplitude-dependent behaviors. Results demonstrate excellent agreement with experiment: the model successfully predicted both a 15 Hz softening shift in the fundamental bending resonance for 50 N excitation, and approximated hysteresis loop areas within 4.9%; bifurcation and higher-harmonic generation were also captured. Most significantly, the simulation time was reduced from 72 hr in the full model to 2.1 hr in the ROM, affirming the applicability of the framework to fast, high-fidelity analysis of nonlinear industrial systems
No takes yet. Share an insight, caveat, or question.
Taha Hussein Karam Alsayyad (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: