Answers are grounded in this paper and cite their sources.
Friction extrusion (FE) is a solid-phase process that can produce high-performance composites with homogeneous microstructures and low porosity via industrially scalable routes. However, the influence of die face geometry on material flow, thermomechanical history, and microstructure remains unclear. This work uses an experimentally validated smoothed particle hydrodynamics (SPH) framework to quantify die-geometry effects during FE of AA1100 (O temper) rods for grid-conductor applications. Five dies are examined: flat (F), scrolled with (S-CB) and without (S) a counterbore, and conical scrolled with (CS-CB) and without (CS) a counterbore. The flat die exhibits a narrow sticking zone and pronounced slip near the orifice, leading to localized strain rate/temperature fields and strong core-edge gradients in plastic strain. Scrolls enlarge the effective processing zone and improve mixing by promoting interfacial sticking, whereas conical faces reduce contact pressure and homogenize thermomechanical fields. Electron backscatter diffraction (EBSD) shows that CS and CS-CB yield the finest dynamically recrystallized grains. A Zener-Hollomon parameter-grain size relationship is further established, providing a physics‑based metric for FE die and process design.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: