Answers are grounded in this paper and cite their sources.
In this work, we fabricated PETG/POE/Fe 3 O 4 nanocomposites via melt blending at a fixed 4:6 PETG‐to‐POE mass ratio with varying Fe 3 O 4 loadings, aiming to develop a magnetic–near‐infrared dual‐responsive shape‐memory polymer for 4D printing. SEM images showed a gradual morphological shift from a sea‐island to a co‐continuous structure as Fe 3 O 4 content increased. Tensile testing gave a peak elongation at break of around 109%. DMA is the primary means to identify the glass‐transition region near 80°C, with DSC providing auxiliary support. Combined with TGA, they confirm no thermal degradation occurs during 3D printing. The composite with 20 phr Fe 3 O 4 showed good shape fixity, recovery performance, and cyclic stability: it achieved 94% recovery under an alternating magnetic field, over 95% under NIR irradiation, and 97.5% recovery within 38 s under synergistic actuation. Sequential stimulus switching also retained high recovery, supporting the material's multi‐mode operational adaptability. Finally, bionic palm and flower structures 3D‐printed with this filament exhibited programmable and controllable deformation under dual stimuli, and this work offers a theoretical and practical reference for multi‐responsive shape‐memory materials in 4D printing.
No takes yet. Share an insight, caveat, or question.
Liao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: