Answers are grounded in this paper and cite their sources.
Shrinking surfaces with wall suction arise in polymer-film processing, the contraction of permeable bio-membranes and suction-controlled microfluidic cooling. On such surfaces the boundary layer can separate and more than one steady flow may exist, so the flow that is actually realised must be identified before the results can be used in design. The aim of this study is to determine the solution structure, the temporal stability and the admissibility of the heat, mass and microorganism layers for a Sutterby fluid carrying a Fe 3 O 4 –CuO–Au–Ag–MoS 2 /water penta-hybrid suspension and motile microorganisms over a permeable surface that shrinks in two directions. The model assumes steady laminar boundary-layer flow, a dilute suspension described by successive-mixture property correlations, a small-shear form of the Sutterby viscosity applied locally, Lorentz and Darcy resistances, Rosseland radiation, a heat sink, Buongiorno diffusion and convective wall conditions. The local similarity equations are solved with the Lobatto IIIA solver bvp5c and pseudo-arclength continuation, and stability is decided from the smallest eigenvalue of a Chebyshev collocation problem; the code reproduces exact Newtonian and magnetohydrodynamic shrinking-sheet solutions and Wang’s stretching-sheet values. For a suction parameter S = 2.5 the momentum problem has no solution below λ c = −1.6857, two solutions for λ c < λ < 0 and, within the range investigated, four solutions for −1.3574 < λ ≤ −0.8; computations on domains up to twelve times longer confirm that the additional pair are genuine half-line solutions. Increasing S from 2.4 to 2.6 extends the existence range by 16.06%, increasing the fraction of each nanoparticle from 0.005 to 0.015 extends it by 13.75%, and at λ = −1.62 the first solution carries 46.75% more skin friction and 24.70% more mass transfer than the second. Only the first solution is stable to similarity-preserving disturbances (smallest eigenvalue 0.4533 against −0.3865), and the concentration and microorganism equations admit decaying layers only for positive far-field suction, so the complete coupled problem possesses at most the first and second solutions. The stable first solution is therefore the flow to be used in the design of suction-controlled shrinking-surface devices that employ multi-component nanofluids, whereas the additional momentum solutions cannot carry realisable transport.
No takes yet. Share an insight, caveat, or question.
Dharmaiah et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: