Answers are grounded in this paper and cite their sources.
To overcome the limited effectiveness of conventional dampers in suppressing high-order modes susceptible to vortex-induced vibration (VIV), this study proposes a combined damper system that provides a lateral damping force through Damper 1 and a rotational damping moment through Damper 2, which is equipped with a rigid cantilever. A linear finite element model that accounts for support flexibility and optional inerter integration is developed. Theoretical modal results indicate that Damper 2 increases the damping ratios of modes 32–36 by more than 200% while causing little change in the low-order modal damping provided by Damper 1. The performance of Damper 2 is sensitive to the relative bending stiffness of the cable and the support stiffness. Specifically, increasing [Formula: see text], corresponding to a decrease in [Formula: see text] relative to [Formula: see text], can reduce the target modal damping by up to 44%, whereas insufficient support stiffness may substantially impair the effectiveness of the rotational damper (Damper 2). Adding an inerter in parallel with Damper 2 can increase the target modal damping ratios by 183%–793% while allowing a lower optimal damping coefficient for Damper 2. A sequential optimization framework is formulated for low-frequency modes associated with rain–wind-induced vibration (RWIV) and selected high-order modes susceptible to VIV. The results demonstrate the theoretical effectiveness of the proposed system in enhancing modal damping within the assumptions of the linear model.
No takes yet. Share an insight, caveat, or question.
Fangdian Di (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: