Answers are grounded in this paper and cite their sources.
Polymer dielectrics exhibit an inherent trade‐off between polarization enhancement and insulation stability. Although conductive fillers enhance polarization, their tendency to promote charge transport and leakage breakdown limits their reliable use. Here, a strategy integrating particle‐size optimization with interfacial stabilization reconfigures conductive liquid‐metal (LM) nanoparticles into polarization‐active and insulation‐stable microcapacitor units. LM nanoparticles are refined into a narrow nanoscale size range to establish a non‐percolative microcapacitor network, while an in situ polydopamine (PDA) shell confines the conductive core and suppresses interparticle electrical coupling. At 0.25 wt.% loading, LM@PDA/PEI achieves a dielectric constant of 4.89, a breakdown strength of 574 MV m − 1 , and a discharged energy density of 6.42 J cm − 3 at 150°C. A polyhedral oligomeric silsesquioxane (POSS) outer layer is then introduced to construct a PDA/POSS dual‐shell structure with multilevel interfacial barriers and localized charge‐confinement states. The LM@PDA@POSS/PEI film exhibits a dielectric constant of 5.62 at 1 MHz, a breakdown strength of 610 MV m − 1 , and a discharged energy density of 7.89 J cm − 3 with > 90% efficiency at 150°C. Even at 200°C, it retains 6.37 J cm − 3 and ≈90% efficiency. This coordinated size‐interface strategy reconfigures conductive fillers into electrically isolated microcapacitor units, offering a general route to high‐temperature dielectric energy storage.
No takes yet. Share an insight, caveat, or question.
Zhou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: