Answers are grounded in this paper and cite their sources.
Compared with the well‐studied and commercially established phosphate and hypophosphite flame retardants, the design, preparation and investigation of phosphite‐based flame retardants in diverse structural forms remain insufficient. Herein, three melamine phosphites (MPIs) with controlled melamine/phosphorous acid molar ratios (2:1, 2:2 and 2:3) were synthesized via an acid‐base salt formation reaction and combined with piperazine pyrophosphate (PAPP) to flame‐retard polypropylene (PP) by melt blending. The MPIs exhibited high initial decomposition temperatures (268°C–297°C), well above the PP processing window. The 20% (7PAPP/3MPI)/PP composite achieved the best overall performance: a limiting oxygen index of 28.5%, UL94 V‐0 rating at 1.6 mm, an 87% reduction in the peak heat release rate (138 kW·m −2 ), and the lowest total smoke release (1292 m 2 ·m −2 ), outperforming the commercial counterparts in combustion behavior and smoke suppression. Meanwhile, the composite retained a high heat deflection temperature (131.8°C) and about 97% of the flexural strength of neat PP. The enhanced flame retardancy originates from a synergistic dual‐phase mechanism in the condensed and gas phases. This work demonstrates that tuning the stoichiometry of melamine phosphite is an effective strategy for designing efficient P/N synergists for PP.
No takes yet. Share an insight, caveat, or question.
刘树炜 et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: