Answers are grounded in this paper and cite their sources.
Residual vibrations in robotic manipulators used for minimally invasive surgery can degrade positioning accuracy and tool-tip stability. These effects are pronounced in telesurgical robots with flexible joints and harmonic drives, where rigid–flexible coupling excites oscillatory dynamics. Since mechanical redesign is constrained by sterilization, compactness, and regulatory requirements, vibration suppression methods without structural modification are highly desirable. This study presents input shaping as a feedforward command prefilter for suppressing residual vibrations in the Sina flex robotic telesurgery system. Experimentally identified dynamic parameters combined with manufacturer-provided transmission stiffness specifications are used to reconstruct configuration-dependent dynamics and extract dominant modal properties for input-shaper design. The designed filter is integrated into the motion command generation while preserving the existing feedback structure operating in Cyclic Synchronous Position (CSP) mode. Experiments on the first and second rotary joints demonstrate that shaped commands significantly reduce residual vibrations compared with unshaped profiles, achieving approximately 90% reduction in RMS vibration levels. Additional near-tip measurements confirm the reduction of distal tool vibrations. The proposed approach improves motion stability and reducing residual oscillations without structural modifications, providing a practical solution for high-precision robotic applications such as telesurgical systems.
No takes yet. Share an insight, caveat, or question.
Rajabi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: