Answers are grounded in this paper and cite their sources.
The present work examines the influence of initial pearlite morphology (fine or coarse) on spheroidizing annealing characteristics and mechanical properties of 80C6 eutectoid steel. Sample A (fine pearlite with cementite lamellar spacing of 0.25 μm) and Sample B (coarse pearlite with cementite lamellar spacing of 0.52 μm), with varying interlamellar spacings, were treated with a specially designed spheroidizing anneal cycle at 705°C for 35 hours, holding in a nitrogen inert gas atmosphere, followed by controlled cooling in a bell annealing furnace. This treatment converts lamellar cementite to spheroidized cementite for the purpose of improving ductility. Microstructural examination by optical microscopy, SEM, and Quantimet image analysis software revealed that fine pearlite spheroidized faster with 65% spheroidization accompanied by small carbides (4–6 µm), whereas coarse pearlite spheroidized only up to 50% with larger spheroids (6–8 µm). Mechanical testing also indicated that spheroidization decreased hardness and strength but increased ductility. The finer pearlite sample showed a superior equilibrium (UTS 566 MPa, YS 457 MPa, elongation 21%, and hardness 168 HV) than the coarse pearlite sample (UTS 555 MPa, YS 398 MPa, elongation 18%, and hardness 155 HV).These results confirm that pearlite fineness is regulated prior to annealing to enhance the spheroidization efficiency and mechanical properties. This bestows genuine benefits for use in the automotive, bearing, and tool steels industries
No takes yet. Share an insight, caveat, or question.
Jayantibhai et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: