Answers are grounded in this paper and cite their sources.
A strain‐compensated constitutive description and candidate high‐efficiency domains were examined for hot deformation of the GH4065A Ni‐based superalloy. Isothermal compression tests were performed at 910–1110 °C and 0.001–10 s −1 . Complete flow curves at 960–1110 °C and 0.001–1 s −1 were used to develop a strain‐compensated hyperbolic‐sine Arrhenius model over true strains of 0.10–0.80. Calibration against 240 paired stress points gave R = 0.991, AARE = 8.46%, and RMSE = 20.1 MPa, while additional tests at 985 and 1085 °C were used to assess temperature interpolation. At true strains of 0.30–0.45, high‐efficiency domains were identified at 960–990 °C below ~0.0067 s −1 and at 1025–1090 °C and 0.0025–0.05 s −1 . The latter was identified as a candidate processing window, with positive ξ values at the mapped strains. Grain size increased from 5.2 to 66.4 μm between 1060 and 1110 °C at 0.1 s −1 , whereas increasing strain rate from 0.001 to 1 s −1 at 1110 °C refined grain size from ~240 to 17 μm. EBSD indicates DDRX as the dominant recrystallization mode, supplemented by CDRX. Primary γ′ particles regulate grain‐boundary migration and particle‐associated nucleation, while the reported recrystallized fractions represent post‐deformation endpoint values.
No takes yet. Share an insight, caveat, or question.
王松辉 et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: