Answers are grounded in this paper and cite their sources.
Polymer dielectric capacitors are key components for high-power electrical energy storage, but their hightemperature performance is often restricted by low intrinsic permittivity, increased conduction loss and reduced breakdown strength. Here, poly(4-methyl-1-pentene) (PMP) was modified with the n-type molecular semiconductor 1,6,7,12-tetrachloro-N,N′-bis(octadecyl)perylene-3,4,9,10-tetracarboxylic diimide (4Cl-C 18 PDI) through solution casting. The optimized 4Cl-C 18 PDI loading was 0.013 mmol/g. The dopant has a low LUMO level of -3.92 eV and introduces an estimated electron-trap depth of approximately 4.11 eV in PMP. Compared with pristine PMP, the composite film increased the low-frequency dielectric constant from 2.10 to 2.20 while maintaining low dielectric loss. The room-temperature DC breakdown strength increased from 475 MV/m to 512 MV/m, and the temperature at 5% weight loss increased from 367.5°C to 454.5°C. These improvements are attributed to the combined effects of conjugated-molecular polarization, deep-trap-assisted carrier restriction and enhanced thermal resistance. The composite film achieved discharge energy densities of 3.2 J/cm 3 at room temperature, 1.69 J/cm 3 at 120°C, and 1.37 J/cm 3 at 150°C. At 200 MV/m, both PMP and the composite films retained stable energy density and efficiencies above 95% after 10,000 cycles. This work links molecular energylevel design with high-temperature dielectric response. These results demonstrate that molecular-semiconductor doping is an effective all-organic route for improving high-temperature capacitive performance in PMP-based dielectric films.
No takes yet. Share an insight, caveat, or question.
Xiong et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: