Answers are grounded in this paper and cite their sources.
Reliable data on soil strength and compressibility are needed for safe and economical foundation design, yet foundations are often designed with little site-specific information. This study characterised the shear strength and settlement behaviour of shallow soils within the University of Ibadan, Southwestern Nigeria, under three land uses: a developed academic area (Zone A), a residential quarters area (Zone B) and an undeveloped area (Zone C). Nine samples were taken at depths of 0.5, 1.0 and 1.5 m and tested for particle size distribution, natural moisture content, standard Proctor compaction, direct shear and one-dimensional consolidation to BS 1377. The soils were coarse-grained lateritic sands and gravels with fines contents of 0–7.1% and natural moisture contents of 5.2–15.3%. Maximum dry densities were high (1.79 to above 2.2 g/cm³) and generally increased with depth. The friction angle ranged from 7.9° to 20.0° and cohesion was zero or small (up to 9.7 kPa). The coefficient of volume compressibility ranged from 1.43 to 4.55 × 10⁻⁴ m²/kN, which is medium for Zone B and mostly high for Zones A and C, and the coefficient of consolidation (2.32–6.72 m²/yr) showed that settlement developed rapidly. Zone B was the least compressible and Zone C the most compressible at depth. The shallow soils are therefore granular lateritic materials rather than classical soft clays, but their properties vary with land use, so foundations within the campus should be designed from site-specific investigation.
No takes yet. Share an insight, caveat, or question.
Korede et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: