Answers are grounded in this paper and cite their sources.
Soil contaminated with diesel oil and its chemical components is a significant environmental concern that affects soil properties and compromises its performance for geotechnical engineering purposes. This paper presents an experimental study of lateritic sandy soil contamination using 2%, 4%, 6%, and 8% diesel oil to evaluate changes in geotechnical properties. Geotechnical characterization tests, ATR-FTIR spectrometry, X-ray diffraction (XRD), gas chromatography, mechanical tests, and scanning electron microscopy were conducted on uncontaminated and contaminated specimens. This study also addresses the gap in understanding the effect of oil contamination over time by conducting unconfined compressive strength (UCS) tests at 7, 28, and 56 days of curing. Results have shown that UCS is affected by oil content and curing time. Regarding curing time, UCS decreased until 28 days, reaching a maximum reduction of 42% for 6% diesel oil. However, at 56 days of curing, the UCS reduction was not observed, and samples with 2%, 4%, and 8% showed a strength recovery. This recovery may be associated with oil evaporation, as verified by gas chromatography. These results can help interpret contaminated-soil behavior and select suitable remediation or stabilization activities.
No takes yet. Share an insight, caveat, or question.
Cardoso et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: