Answers are grounded in this paper and cite their sources.
This study aims to address the environmental and economic challenges of mass concrete production by evaluating the integration of industrial waste by-products, such as ground granulated blast furnace slag (GGBFS), fly ash (FA), and waste crushed sand, into 50-MPa concrete mixtures. The objective is to identify sustainable alternatives to traditional cementitious materials through life cycle assessment (LCA), cost analysis, and multicriteria evaluation. This study adopts an integrated assessment framework that jointly incorporates chilled-water energy modeling, allocation sensitivity of industrial by-products, and cost analysis within a mix-specific cradle-to-gate LCA. Three mixtures were examined, including M1 (50% GGBFS + 50% OPC), M2 (20% FA + 80% pozzolanic cement), and M3 (low-heat cement). M1 demonstrated the lowest global warming potential (280.75 kg CO 2 - eq / m 3 ) and outperformed others in eight environmental impact categories, with minimal effects on human health [4.44 × 10 −4 disability-adjusted life years (DALY)] and resources (11.9 USD2013). M2 offered strong environmental performance and the lowest cost (USD 43.5/m 3 ), achieving savings of up to USD 32,400 for 4,000 m 3 compared with M3. M3 showed the highest emissions and cost. The results affirm that using waste-derived materials can significantly reduce environmental burdens and improve the economic feasibility of mass concrete.
No takes yet. Share an insight, caveat, or question.
Pham et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: