Answers are grounded in this paper and cite their sources.
Poly(3-hexylthiophene) (P3HT) is a promising low-cost, hole-transport material for stable, scalable perovskite solar cells (PSCs). However, the performance of P3HT-based PSCs is often limited by suboptimal charge transport associated with disordered molecular aggregation and packing in solution-processed P3HT films. Here, we demonstrate a solvent-controlled strategy to regulate the molecular ordering and morphology of P3HT in MAPbI3-based PSCs. Chloroform and dichlorobenzene (DCB), selected for their different boiling points and evaporation rates, are combined to tune solvent evaporation during P3HT film formation. The optimized CHCl3/DCB (4:1) blend produces a compact, ordered film with reduced crystallite misorientation, yielding a champion PCE of 17.1% without additional interfacial passivation or modification of the P3HT hole-transport layer. The optimized processing conditions were also used to fabricate PSC modules with active areas up to 36 cm2. Under outdoor sunlight, a 36 cm2 module delivered an output power of approximately 0.1 W, while module-scale devices powered commercial low-power electronics under indoor illumination. Long-term ambient dark-storage measurements showed retention of ∼80% of the initial PCE after one year using a simple paraffin−acrylic encapsulation strategy. These results demonstrate that solvent-controlled molecular ordering and film morphology in P3HT influence photovoltaic performance and that this approach can be extended to larger-area PSC module fabrication for practical low-power energy-harvesting applications.
No takes yet. Share an insight, caveat, or question.
Chauhan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: