Answers are grounded in this paper and cite their sources.
Hermetic alumina/Kovar® joints are essential for electrovacuum devices, but they are usually brazed with silver-based active fillers, which are prone to corrosion and electrochemical migration. Moreover, the commercial Cusil-ABA® filler fails to give reproducibly vacuum-tight joints when the Kovar® part is thick. We propose a silver-free alternative: a rapidly quenched amorphous Cu–Ti filler combined with a pure Cu interlayer that is melted completely during brazing. In this approach, the high-titanium filler ensures wetting of the ceramic, while the separately introduced copper forms a ductile seam. Without the interlayer, or when the interlayer only partly dissolves, hermeticity depends on the Kovar® thickness and is irreproducible. After complete melting of the interlayer, all 21 tested capsules showed no detectable helium leak (<5×10⁻¹³ Pa·m³/s), regardless of the Kovar® thickness, and the joints were stronger than Cusil-ABA® joints. Microstructural analysis shows that melting removes the continuous brittle intermetallic layer at the Kovar® and forms a continuous oxide layer at the ceramic. Complete melting of the Cu interlayer is thus the key condition for reliable silver-free alumina/Kovar® joints.
No takes yet. Share an insight, caveat, or question.
Ivannikov et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: