Answers are grounded in this paper and cite their sources.
This work investigated the effects of process parameters on the microstructural and mechanical properties of dissimilar aluminium alloys AA7075 and AA6061 by the underwater Friction stir welding process. The welding of dissimilar alloys is crucial for aerospace and structural applications due to their distinct mechanical properties. Rapid heat dissipation can mitigate the effects of heat in dissimilar aluminium alloy welding. So, the advanced technique of FSW, i.e., underwater friction stir welding (UFSW), has significant capacity to weld soft and dissimilar alloys without cracks, with lower residual stresses, and with improved strength. However, the present study is an attempt to evaluate the performance of UFSWed joints at different tool rotational speeds (TRS) from 600 rpm to 1400 rpm and transverse welding speeds (WS) from 15 mm/min to 60 mm/min. The combination of these two considered process parameters is made because they can significantly affect heat generation. The study revealed that the UFSW of AA6061-AA7075 joints achieved an ultimate tensile strength (UTS) of approximately 78.41% of the base material, AA6061, at 1000 rpm and 35 mm/min, with an elongation of 7.1%. The hardness values of all welded joints drop rapidly to around 82-100 HV as the indentation path approaches the TMAZ.
No takes yet. Share an insight, caveat, or question.
Ghangas et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: