Answers are grounded in this paper and cite their sources.
Practical high‐voltage lithium metal batteries are limited by the difficulty of simultaneously stabilizing highly reactive Li metal anodes and oxidative cathode surfaces under lean‐cell conditions. Herein, an anion‐rich localized weakly solvating electrolyte is strategically developed by incorporating trace lithium bisoxalatodifluorophosphate (LiDFBOP) into a LiDFOB/FEC‐DMC/TTE electrolyte, in which excessive DFOB − ‐rich aggregates are selectively suppressed to enable a dual‐anion‐involved contact‐ion‐pair (CIP)‐dominated configuration with moderate solvent‐assisted Li + coordination. The regulated solvation environment directs interphase formation at the molecular level, generating robust and ion‐conductive B/F/P‐containing interphases on both electrodes that are responsible for simultaneously stabilizing Li plating/stripping and cathode‐side oxidative interfaces. Consequently, the resulting electrolyte enables high‐voltage operation at 4.5 V over a wide temperature range from −10°C to 75°C. Under stringent lean‐Li (N/P ≈ 1.70) and lean‐electrolyte conditions (20 µL), Li||LMFP, Li||NCM811, and Li||LCO cells deliver stable cycling with 94.1% capacity retention after 270 cycles, 85.9% retention after 200 cycles, and 81.0% retention after 153 cycles, respectively. Furthermore, Ah‐level pouch cells using the optimized electrolyte achieve 90.0% capacity retention after 300 cycles for Li||LMFP and 91.3% retention after 150 cycles for Li||NCM811, outperforming many recently reported electrolyte strategies in terms of practical high‐voltage lithium metal battery performance.
No takes yet. Share an insight, caveat, or question.
Du et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: