Answers are grounded in this paper and cite their sources.
This study investigates the residual seismic performance of RC frames with nonstructural RC infill walls containing window or door openings. Six specimens were tested under reversed cyclic loading, including undamaged reference specimens and specimens representing slight and heavy damage. The effects of prior damage on stiffness, lateral strength, hysteretic response, and energy dissipation were examined. The tests showed that prior damage had a pronounced influence on the response at drift levels below the maximum drift previously experienced by the specimen. As the applied drift increased beyond the pre-damage target drift, however, the responses of the damaged specimens gradually approached those of the corresponding undamaged specimens. Severe deterioration of the infill wall did not result in immediate loss of the lateral resistance of the complete specimen, as the surrounding ductile RC frame continued to carry lateral load after substantial strength degradation of the wall. The measured residual properties were also compared with the modification or reduction factors recommended by FEMA 306 and JBDPA. The comparisons indicate that the applicability of these factors depends on the damage level and on whether the infill wall or the complete RC frame–infill wall system is considered. To reduce the uncertainty associated with damage classification and the selection of prescribed reduction factors, a simple method is proposed for constructing the residual backbone curve using the undamaged response and the drift associated with the assessed damage state. The proposed approach provides a practical representation of the residual response of earthquake-damaged RC frame–infill wall systems for nonlinear structural analysis.
No takes yet. Share an insight, caveat, or question.
Liao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: