Answers are grounded in this paper and cite their sources.
This paper presents a computed design study of a geothermal energy system on a single stated operating principle: a sealed wellbore circulates its own working fluid down and back up without ever contacting the formation — heat arrives only by conduction through the rock and the well wall — so the system works in rock with no permeability, no water and no fracture network, and produces nothing that needs disposal. The system is two sealed coaxial wells of 5,000 metres depth in rock with a geothermal gradient of 55 kelvin per kilometre and thermal conductivity 2.8 watts per metre-kelvin, each circulating 12 kilograms per second injected at 40 degrees Celsius, feeding a shared binary unit condensing at 35 degrees Celsius. The design target is the conductive heat supply per well from the stated gradient, conductivity and thermal-influence radius, the resulting wellhead temperature, and the net electrical output of the surface unit — printed so the closed loop's rate limit is a number, not an impression. The net electrical output is 0.162 megawatts from a produced flow of 24.0 kilograms per second, a net conversion efficiency of 4.16 percent of the extracted thermal power of 3.9 megawatts, and an annual electricity production of 1.31 gigawatt-hours at the stated capacity factor. The purpose throughout is civilian energy supply: electricity for grids and facilities, or heat for buildings, food production and industry. Nothing in the design is optimized for any other use, and the study has no targeting or weapon application. It is a computed study; every performance figure is simulated from the stated assumptions, not measured.
No takes yet. Share an insight, caveat, or question.
William Alexander Aldred (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: