Answers are grounded in this paper and cite their sources.
This study presents a multi annular tube bundle reactor for large scale stationary hydrogen storage, incorporating tapered width longitudinal fins and a central cooling tube to enhance thermal management while targeting a lightweight configuration with improved heat transfer performance. A three dimensional numerical model was developed to investigate four reactor configurations with different heat transfer enhancement strategies using LaNi 5 as the hydrogen storage alloy. Among the investigated configurations, Design 4, exhibited the best overall performance. It absorbed 1.37 wt.% of hydrogen in 682 s, reducing the absorption duration by 41.5 %, 20.6 %, and 6.3 % compared with designs 1, 2, and 3, respectively. The time required to reach 90 % hydrogen absorption was 318 s, representing a 50.5 % reduction compared with the baseline design. During desorption, design 4 released 90 % of the stored hydrogen in 348 s, reducing the corresponding time by 48.9 % relative to the baseline design. Further analysis showed that increasing the number of tapered fins and their thickness improved absorption performance, although this reduced alloy loading volume and gravimetric storage density. Comparison with selected reactors reported in the literature showed that the proposed design reached 90 % hydrogen absorption in 318 s, compared with 564 s, 375 s, and 535 s for the reactors reported by Jana et al., Chandra et al., and Li et al., respectively. These findings demonstrate the potential of the proposed configuration for large scale stationary hydrogen storage, while highlighting the trade-off between gravimetric storage density and hydrogen storage capacity.
No takes yet. Share an insight, caveat, or question.
Chauhan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: