Answers are grounded in this paper and cite their sources.
Controlling catalyst reconstruction and product selectivity remains a major challenge for copper-based electrocatalysts during the electrochemical CO2 reduction reaction (CO2RR). Herein, we demonstrate a ligand-controlled and polymer-mediated strategy to regulate the catalytic behavior of precursor-derived copper coordination polymers through their coordination environment. Two copper-imidazole coordination polymers, [Cu(IMN)2]n and [Cu(BiZ)2]n, were synthesized and investigated as CO2RR electrocatalysts. Structural characterization confirmed the coordination of Cu2+ centers with imidazole-based ligands and the formation of well-defined coordination frameworks. Online electrochemical mass spectrometry combined with gas chromatography revealed distinct product distributions for the precursor-derived [Cu(IMN)2]n and [Cu(BiZ)2]n electrocatalysts. The [Cu(IMN)2]n-derived catalyst exhibited Faradaic efficiencies of 13.06% for CO at –0.9 V, 39.87% for CH4 at –1.2 V, and 8.54% for C2H4 at –1.1 V vs RHE, whereas the [Cu(BiZ)2]n-derived catalyst achieved 28.43, 22.25, and 31.98%, respectively. Electrochemical polarization generated Cu-derived nanoparticles with average diameters of 27.0 ± 2.6 nm for [Cu(IMN)2]n and 37.0 ± 4.1 nm for [Cu(BiZ)2]n, indicating that the ligand environment influences catalyst nanostructure and product selectivity. X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM) analyses further indicated electrochemical reconstruction toward reduced Cu-derived domains, while the initially present nitrogen-containing species may have contributed to nanoparticle stabilization and organization during reconstruction. The electrocatalytic performance was further validated in membrane electrode assembly (MEA) electrolyzers under zero-gap conditions, where the selectivity trends observed in H-type cells were reproduced. The [Cu(BiZ)2]n-modified PTFE/C electrode achieved ∼42% Faradaic efficiency for C2H4 at 20–40 mA cm–2, compared with ∼35% for bare PTFE/Cu, whereas [Cu(IMN)2]n-modified PTFE/C increased CH4 selectivity from ∼5 to ∼15% at higher current densities. Together, these findings demonstrate that the precursor coordination environment influences copper reconstruction, Cu-derived nanostructure, and CO2RR product selectivity, while polymer-mediated interfacial modulation enables control of catalyst evolution under operating conditions. This coupled control of ligand-directed reconstruction and interfacial environment provides complementary design principles for selective Cu-based CO2RR.
No takes yet. Share an insight, caveat, or question.
Paquini et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: