Answers are grounded in this paper and cite their sources.
The growing demand for sustainable energy highlights the need to reduce reliance on fossil fuels and decarbonize hard‐to‐abate sectors such as cement, metallurgy, and aviation. As a promising pathway, microalgae cultivation can utilize industrial CO 2 emissions, which, when associated with hydrothermal liquefaction (HTL), enables net‐zero systems in a biorefinery context. This thermochemical process converts biomass into biocrude, biogas, hydrochar, and wastewater, with the oily phase that can be refined to produce commercial biofuels in subsequent upgrading and separation stages. In this study, a kinetic Aspen Plus model was developed using a plug‐flow reactor to evaluate product yields and compositions for Chlorella sp., Nannochloropsis sp., and Pavlova sp. at 250 bar and temperatures ranging from 250 to 400 °C. Average dry‐basis biocrude yields ranged from 31.60% to 43.80%, with higher lipid content correlating with greater yields. Elevated temperatures favored aqueous‐phase products, while increased biomass concentrations (15–25%) enhanced biocrude output. An energy assessment revealed that although higher temperatures increased the biocrude's higher heating value to 40.48 MJ kg −1 , they significantly elevated the specific energy consumption, causing the net energy ratio to drop from 0.63 to 0.35, identifying 250 °C as the most efficient operating temperature from an energy perspective. Additionally, the Van Krevelen diagrams confirmed successful deoxygenation and denitrogenation pathways, since the biocrude exhibited a reduction in its O/C ratio to 0.04 and an increase in H/C to 1.90 due to dehydration and decarboxylation, yielding a high‐quality product with properties closer to crude liquid fossil fuels, while heteroatoms migrated predominantly to the aqueous and gaseous phases. The model, validated against literature and experimental data, accurately represents HTL kinetics without external scripts. These findings provide a modeling approach that supports process optimization, techno‐economic evaluation, and integration of HTL into sustainable biorefinery setups.
No takes yet. Share an insight, caveat, or question.
Gonçalves et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: