Answers are grounded in this paper and cite their sources.
High‐loading Ni‐rich cathodes are constrained by coupled ion‐transport limitations, mechanical damage, and interfacial degradation, whereas conventional poly(vinylidene fluoride) (PVDF) binders primarily provide passive particle adhesion. Here, a fluorine‐free epoxy–polyether crosslinked binder network (X‐EP) is developed for high‐loading LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathodes. Formed through epoxy–amine ring‐opening reactions among bisphenol A diglycidyl ether, polyether‐based diglycidyl ether, and Jeffamine curing agents, X‐EP integrates ion‐accessible polyether segments, hydroxyl‐rich interfacial functionality, and mechanical resilience. Relative to PVDF, X‐EP shows higher electrolyte affinity, Mn 2+ ‐binding capability, binder‐film ionic conductivity, mechanical resilience, and calculated adhesion to NCM811, resulting in reduced polarization and improved apparent Li + transport kinetics. In half cells, X‐EP retains 80.98% of its initial capacity after 100 cycles, compared with 32.30% for PVDF. At an areal loading of ≈20 mg cm −2 , X‐EP retains 78.43% capacity after 400 cycles in coin‐type full cells and 78.29% after 150 cycles in pouch‐type full cells. Post‐mortem analyses reveal suppressed intergranular cracking and interphase growth, together with better preservation of the layered structure. These findings demonstrate a binder‐design strategy that couples ion accessibility, interfacial affinity, and mechanical resilience to stabilize high‐loading Ni‐rich cathodes.
No takes yet. Share an insight, caveat, or question.
Sun et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: