Answers are grounded in this paper and cite their sources.
Ultra-wide-bandgap (UWBG) semiconductors are promising for power electronics, but high-breakdown diodes often suffer from high turn-on voltages and defect-related performance limits, requiring high-temperature processing. This work demonstrates that electron wind force (EWF)-assisted processing significantly reduces the turn-on voltage of aluminum nitride (AlN) diodes at room temperature, eliminating the need for thermal annealing. Across four room-temperature devices, the average turn-on voltage decreases from 2.34 ± 0.23 to 1.23 ± 0.38 V after EWF processing, while the forward current at 5 V increases from 78.23 ± 20.75 pA to 110.4 ± 20.8 pA. Infrared thermal imaging during processing shows that the sample temperature remains close to ambient, supporting the low-thermal-budget nature of the approach. High-frequency capacitance–voltage measurements reveal a systematic modification of junction electrostatics, indicating reorganization of electrically active defect states within the depletion region rather than changes in bulk conductivity. Complementary Raman spectroscopy shows a modest narrowing of the E 2 (high) phonon linewidth, from 5.04 to 4.82 cm -1 , reflecting reduced defect-related phonon scattering. Time-dependent measurements show partial relaxation of the turn-on voltage shift after four days, suggesting that the EWF-induced modification is metastable rather than conventional bulk lattice annealing. Together, these results show that room-temperature EWF processing provides an electrically driven route to lowering the turn-on voltage of AlN diodes, addressing a key limitation in UWBG rectifiers.
No takes yet. Share an insight, caveat, or question.
Rahman et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: