Answers are grounded in this paper and cite their sources.
Selective formation of bicyclic aromatic hydrocarbons from lignocellulosic biomass is complicated by competing cracking, deoxygenation and aromatization of primary pyrolysis vapours. A metal-free HY–HZSM-11–HZSM-5 cascade was developed to direct wheat-straw pyrolysis towards bicyclic aromatic precursors for high-density sustainable aviation fuel blendstocks. Single-, dual- and three-bed configurations were screened at fixed catalyst loading, followed by a central composite rotatable design varying the three zeolite SiO 2 /Al 2 O 3 ratios (SARs) and biomass-to-catalyst ratio (B/C). The ordered cascade enriched naphthalene-series and other bicyclic aromatics with only a modest decrease in recovered oil–water condensate in the screening tests and outperformed physical-mixture and reversed-bed controls. Reduced quadratic models described the total and bicyclic aromatic responses (R 2 ≈0.95). HY SAR and B/C were significant factors; the HZSM-5 SAR response was quadratic, and HZSM-11 SAR contributed through interactions with B/C and HZSM-5 SAR. Validation with HY(25)–HZSM-11(75)–HZSM-5(75) at B/C = 0.2 gave 91.23 area% aromatic hydrocarbons and 83.63 area% bicyclic aromatics, close to predicted values of 94.0% and 86.6%. These GC–MS area-based responses support sequence-dependent vapour upgrading, but calibrated absolute yields and broader feedstock validation are still required.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: