Answers are grounded in this paper and cite their sources.
To improve the adhesion and corrosion resistance of aluminum, the dual-layer anodic oxide film was formed by sequential anodizing in phosphoric acid (PA) and oxalic acid (OA) electrolytes. The upper-layer anodic oxide film, with large pore diameter and thick barrier layer, was obtained by applying a high voltage in PA electrolyte. While the large pore diameter could improve adhesion, the thick barrier layer hindered the uniform growth of the lower-layer anodic oxide film formed by anodizing in OA electrolyte. To achieve a uniform growth of the lower-layer film, the barrier layer of the upper-layer film was thinned using the current recovery method. Consequently, pores grew continuously at the interface between the upper-layer and lower-layer films, resulting in a uniform film thick-ness of the dual-layer film. When the dual-layer film was subjected to hot water sealing, few flaky hydrates formed in the upper-layer film and the pores remained open at the surface, whereas many granular hydrates formed in the lower-layer film. Thus, the dual-layer film could improve both adhesion and corrosion resistance of aluminum.
No takes yet. Share an insight, caveat, or question.
Takeuchi et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: