Answers are grounded in this paper and cite their sources.
Introduction and Objectives: Wear and corrosion are among the primary challenges that reduce the service life and performance of industrial components. In this study, a sol-enhanced method is employed to incorporate ceria into electroless Ni-P/Ni-B coatings to improve mechanical, tribological, and corrosion properties.Materials and Methods: A uniform distribution of ceria nanoparticles was achieved by introducing ceria sol derived from an alkoxide precursor into the Ni-B electroless bath. Characterization was performed by XRD and FE-SEM, DLS, potentiodynamic polarization test, and pin-on-disk wear tests.Results: The results showed that the use of ceria sol improved the uniformity of the distribution of reinforcing particles and formed a relatively dense Ni-B coating with good surface quality and no real surface cracks. The surface features were mainly related to the boundaries of cauliflower nodules. The polarization curve indicates a more stable with slower rate of corrosion for the CeO2-containing coating compared to the substrate, due to the formation of a protective layer and increased surface chemical stability. Using the Ni-P/Ni-B-CeO2 coating on the aluminum substrate resulted in a 21% reduction in the friction coefficient and a 70% reduction in the specific wear rate compared to the substrate.Conclusion: Using sol of ceria in Ni-B coatings, due to the prevention of particle accumulation in the coating, led to a significant increase in corrosion resistance, reduced friction coefficient, and improved wear resistance of the coating.
No takes yet. Share an insight, caveat, or question.
Badiee et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: