Answers are grounded in this paper and cite their sources.
In isolated features, such as silicon trenches, of a patterned semiconductor substrate a sidewall taper during chlorine-based plasma etching originates from the deposition of chemical by-products on the sidewall, which progressively shifts the boundary of the etchable horizontal surface outwards. This deposition can be mitigated by controlling the gas-phase radical densities using power pulsing schemes. Our time-resolved laser-induced fluorescence measurements of SiCl 2 radicals and the high-sticking-coefficient SiCl radicals reveal that their density is governed by the absolute on- and off-times. The observed density behavior suggests that SiCl radicals are: (a) produced through a combination of higher silicon chlorides (SiCl 2 − 4 ) dissociation by electron-impact and metastable-assisted processes, and direct surface-generated pathways, with dissociation of species such as SiCl 2 making a major contribution under the present experimental conditions, and (b) lost primarily through rapid gas-phase reactions and wall losses, rather than through evacuation from the chamber. The presence of argon in the plasma enhances the density and persistence of SiCl radicals while simultaneously reducing the gas-phase density of SiCl 2 , suggesting that argon substantially modifies the plasma kinetics responsible for the dissociation of higher silicon chlorides (SiCl 2 − 4 ), potentially through an increase in electron density and argon metastable assisted reactions. We further show that for sufficiently long on- and short off-times, SiCl radicals are produced from the start of the on-phase with their density reaching saturation and subsequently decaying in the afterglow, yielding a tapered isolated sidewall profile. Conversely, for sufficiently long off-times allowing the loss of a significant portion of SiCl 2 radicals, the SiCl density growth during the on-phase experiences a marked delay, so selecting sufficiently short on-time allows reducing SiCl gas-phase density by an order of magnitude and achieving a desired nearly vertical sidewall profile. The features profiles in this work were imaged using transmission electron microscopy.
No takes yet. Share an insight, caveat, or question.
Kondeti et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: