Answers are grounded in this paper and cite their sources.
Aluminum (AI) alloys account for >60% of aircraft structural weight, with 2xxx and 7xxx series alloys widely used; however, high buy-to-fly ratios in aerospace manufacturing generate substantial quantities of machining scrap that are unsuitable for remelting because of oxidation and contamination losses. Aligned with sustainable manufacturing (SDG-12), severe plastic deformation-based solid-state consolidation techniques facilitate direct upcycling of Al waste into functional materials but remain constrained by scalability and processing limitations. Therefore, this study demonstrates for the first time, a novel Hybrid-Low Pressure Torsion process to transform AA2024 and AA7050 chips reinforced with varying weight fractions of graphene nanoplatelets into electrochemically active battery anodes through direct solid-state consolidation, showing the feasibility of implementing the process on existing workshop machinery and providing a potential pathway toward scalable manufacturing. The process integrates external and frictional heating with plastic deformation under combined torsional shear and compressive loading, promoting friction welding and void closure of pre-compacted chips. A dedicated sample‑flipping provision facilitates uniform through-thickness densification. Microhardness measurements reveal that the hardness distribution is governed by the combined effects of torsional shear, plastic deformation, reinforcement dispersion, and bidirectional processing. Among the investigated compositions, the AA2024–0.68 wt.% and AA7050–0.68 wt.% (183 HV100) exhibit the optimal hardness. AA7050–0.68 wt.% demonstrates superior electrochemical performance due to synergistic shear-induced grain refinement and the intrinsically low thermal diffusivity of the 7xxx alloy. Its hierarchical fine-grained architecture with GNPs and refined precipitates enhances conductivity, accelerates ion diffusion, reduces charge-transfer resistance, and improves electrochemical activity compared with bulk alloys and pure Al.
No takes yet. Share an insight, caveat, or question.
Adi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: