Answers are grounded in this paper and cite their sources.
Rapid determination of radiocesium ( 137 Cs and 134 Cs) in seawater is crucial for routine marine monitoring and nuclear emergency response. However, quantifying 137 Cs in the open ocean requires large-volume preconcentration and low-background laboratory analysis, delaying quantification until after a research cruise concludes. This study presents a shipboard workflow that integrates potassium nickel hexacyanoferrate–polyacrylonitrile (KNiFC-PAN) preconcentration with onboard high-purity germanium (HPGe) gamma-ray spectrometry. By utilizing 25 mL of KNiFC-PAN with bidirectional stirring (600 rpm for 3 h, direction reversal every 10 min), the protocol achieved a mean chemical Cs recovery of 96.45% ± 0.86% ( n = 25) for field seawater samples. Shipboard pretreatment and HPGe counting were completed within ~13 h per sample, with final recovery correction performed post-cruise by inductively coupled plasma mass spectrometry. In an external proficiency test, the measured 137 Cs activity concentration (148.0 ± 4.9 mBq kg −1 ) closely agreed with the assigned value (151.7 ± 6.1 mBq kg −1 ; ζ = −0.5). Furthermore, a paired analysis of 18 seawater samples against a conventional land-based method demonstrated a negligible mean bias of −0.029 mBq kg −1 . While 137 Cs is the primary target of routine background monitoring, the low 134 Cs minimum detectable activity (0.11–0.21 mBq kg −1 ) supports rapid detection and source attribution of new releases during nuclear emergencies. Field application in the Northwestern Pacific resolved background-level surface and vertical 137 Cs distributions consistent with water-mass structure. The proposed method enables rapid radiocesium quantification integrated directly with concurrent oceanographic observations.
No takes yet. Share an insight, caveat, or question.
LEE et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: