Answers are grounded in this paper and cite their sources.
Groundwater–air pressure may break the full-basin impervious systems in pumped-storage reservoirs built in karst depressions. This study developed polyurethane-based similar materials for asphalt concrete impervious layers. An L9(3 4 ) orthogonal design was used to evaluate the formulation factors. Mechanical and permeability tests, weighted grey relational analysis, uplift loading, and SEM–EDS were used for formulation screening and validation. Across the nine formulations, elastic modulus, flexural modulus, flexural strength, and maximum flexural tensile strain ranged from 1.47 to 5.07 MPa, 2.10 to 12.42 MPa, 0.11 to 1.02 MPa, and 4.12% to 13.69%, respectively. Results showed that the curing ratio had the greatest effect on flexural modulus and maximum flexural tensile strain, whereas talc powder increased stiffness and DOP enhanced deformation capacity. The novel mechanical uplift tests were carried out, and result showed that the deformation and cracking processes broadly similar to those of the asphalt concrete prototype. The material group X5 also exhibited more uniform talc dispersion and matrix encapsulation than material groups X1 and X9. This study provides a method for preparing similar materials with adjustable deformation and strength properties for physical model studies of asphalt concrete impervious structures.
No takes yet. Share an insight, caveat, or question.
徐才成 et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: