Answers are grounded in this paper and cite their sources.
This paper presents a computed design for a inclined screw generator at a restored mill leat, operating on the following principle: water fills the pockets between helical flights on an inclined shaft and its weight, acting downslope as the screw turns, drives the shaft slowly with very high torque, reversing the ancient pumping screw into a generator. The screw is 5.4 metres long at an implied 77 revolutions per minute, each revolution passing 1.09 cubic metres, and the shaft torque reaches 3.0 kilonewton metres while delivering 22 kilowatts net. The screw is the gentlest machine in this set: it turns slowly, its passages are wide, and debris and fish pass through with far less harm than in any bladed runner. Its budget is therefore a torque and geometry budget rather than a cavitation one, and the study reports the volume carried per revolution because that figure, with the inclination, fixes the speed and hence the gearbox ratio. All sizing follows from computed head, flow, turbine-efficiency, cavitation and, where the design stores energy, storage budgets, each worked in the deposited calculation script from stated inputs. The study is a design exercise for civilian electricity production; it is simulated, not measured, and no part of it concerns any weapon or targeting application.
No takes yet. Share an insight, caveat, or question.
William Alexander Aldred (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: