Answers are grounded in this paper and cite their sources.
This study presents an experimental multi-variable performance mapping of a water-to-water counter-flow double-pipe heat exchanger conducted in the Thermo Laboratory of the Department of Mechanical Engineering, Igbinedion University Okada. Twenty steady-state operating conditions were examined in which hot-water flow rate ranged from 1.52 to 4.43 L min⁻¹ and cold-water flow rate from 3.12 to 7.02 L min⁻¹. The exchanger comprises a copper inner tube (outer diameter 25.4 mm), effective length 1.50 m and heat-transfer area 0.120 m² based on the outer surface of the inner tube. Measured heat-transfer rates increased from approximately 1.55 kW to 9.40 kW. The overall heat-transfer coefficient rose from 440 to 5144 W m⁻² K⁻¹ while the logarithmic mean temperature difference declined from 29.3 °C to 15.2 °C. Thermal effectiveness increased from 36.2 % to 74.7 %. Linear regression analyses revealed strong positive associations between hot-water flow rate and both average heat duty (R² = 0.997) and overall heat-transfer coefficient (R² = 0.978). The maximum hot/cold energy-balance discrepancy was 0.65 %. Because both stream flow rates varied simultaneously, the results constitute a multi-variable operating map rather than an isolated single-variable effect study. The work provides a transparent, statistically characterised laboratory baseline that can support teaching, equipment commissioning and preliminary design calculations.
No takes yet. Share an insight, caveat, or question.
ODEJIMI et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: