Answers are grounded in this paper and cite their sources.
This study investigates a macroscopic methodology compatible with finite element modelling (FEM) for evaluating sheared-edge ductility in a DP800 dual-phase steel using conical hole expansion tests combined with digital image correlation (DIC) and finite-element modelling. Mechanically sheared edges introduce strong deformation and damage gradients that reduce local formability below the conventional forming-limit curve and are difficult to resolve directly in industrial shell-based forming simulations. To address this limitation, the experimentally measured initial hole geometry was transferred into the FEM model, and the DIC-reconstructed specimen geometry at the onset of edge cracking was correlated with the numerical deformation state. This geometry-matching procedure identifies a simulation-compatible failure point without relying solely on local strain values, which are sensitive to DIC gauge length and mesh discretization. The results show that punched holes fail at a lower punch displacement than milled reference holes, confirming the strong influence of edge preparation on effective edge ductility. The proposed approach provides industrial value by enabling experimentally observed edge-crack initiation to be incorporated into practical shell-based forming simulations for improved assessment of stretch-flange and edge-cracking risk.
No takes yet. Share an insight, caveat, or question.
Dhawale et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: