Answers are grounded in this paper and cite their sources.
Alkali‑carbonate reaction (ACR) is a complex deleterious reaction in concrete. Only recently has the mechanism leading to distress been identified in specimens exposed to the concrete prism test (CSA A23.2-14A) conducted at 38 °C. However, the average temperature in affected structures is well below this value. Therefore, a simplified system was used to study the formation of reaction products and the expansion of rock prisms at a temperature of 23 °C. Prisms produced from Kingston and Quebec limestones were immersed in 1 M NaOH following ASTM C586. The average expansions of the rock prisms after 244 days of immersion (1 M NaOH solution) were largely different, for the Kingston (0.90%) and the Quebec (0.12%) limestones respectively. The investigation of polished thin sections by scanning-electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS) showed that cracks originate in illite-rich layers of the Kingston limestone. The reaction products present in such layers are hydrotalcite and magnesium-silicate-hydrate (M-S-H) with minor amounts of brucite (and non-expansive calcite). In the case of the Quebec limestone, the presence of dolomite, minor amounts of illite and reactive quartz lead to the formation of M-S-H as the main product with minor amounts of brucite and hydrotalcite (and non-expansive calcite), both at a considerably lower degree of dedolomitization compared to the Kingston limestone. In both rock types, alkali-silica reaction products are absent. Experiments on K-illite samples further revealed that no change in basal spacing occurs in 1 M NaOH solution, excluding clay swelling as a source of expansion of the rock prisms.
No takes yet. Share an insight, caveat, or question.
Fecteau et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: