Answers are grounded in this paper and cite their sources.
Excavation-induced stress redistribution damages surrounding rock, while subsequent groundwater ingress may accelerate deterioration. Forty sandstone specimens underwent four cyclic pre-damage levels and five immersion durations (0, 1, 3, 5 and 7 d), followed by uniaxial compression with synchronised acoustic-emission (AE) monitoring. Water uptake approached saturation nonlinearly; increasing pre-damage shortened the fitted half-saturation time and slightly increased saturation water content. Peak strength and elastic modulus decreased with pre-damage and immersion. Without immersion, the highest pre-damage level reduced these properties by 9.1% and 19.3%, respectively. After 7 d immersion, corresponding reductions in initially undamaged specimens were 48.9% and 38.4%. AE activity became increasingly concentrated near peak failure, while recorded cumulative counts generally decreased with immersion. RA–AF analysis indicated tensile-dominated cracking with an increasing post-peak shear contribution. The b-value evolution suggested a greater contribution from relatively large AE events under severe damage. Fragment-mass fractal dimension varied nonmonotonically with immersion, peaking under high pre-damage and prolonged immersion. These results support path-dependent deterioration: cyclic damage promotes water ingress, immersion weakens the damaged structure, and subsequent loading drives mixed-mode crack coalescence. Mechanical and AE responses provide laboratory-scale indicators for assessing water-affected, excavation-damaged sandstone.
No takes yet. Share an insight, caveat, or question.
Shang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: