Answers are grounded in this paper and cite their sources.
This study examines the effect of sugarcane biochar on the structural, mechanical, thermal, and fire-related behaviour of flax/kenaf/flax hybrid epoxy composites with different weight contents of biochar (0–6 wt%). FTIR analysis shows that chemical structure changes may occur and that there might be interactions between the biochar and the epoxy matrix. Mechanical characterisation revealed that the measured mechanical properties improved with biochar contents up to 4.5 wt%, but decreased at 6 wt% biochar loading, where changes in filler distribution may have occurred. At 4.5 wt% biochar, the composite exhibited a tensile strength of 38.01 ± 0.55 MPa, flexural strength of 76.12 ± 0.90 MPa, impact strength of 9.62 ± 0.45 kJ/m 2 , hardness of 86 ± 1 Shore D, and ILSS of 13.24 ± 0.35 MPa. Additionally, TGA/DTG results revealed that the thermal degradation resistance was enhanced, as the onset degradation temperature rose to 317 °C and the residual char content was 28% at 4.5 wt% biochar. The fire-performance evaluation revealed that the LOI of neat epoxy increased from 19.5 ± 0.5% to 28.4 ± 0.8% at 4.5 wt% biochar. The same formulation showed a lower PHRR of 300.10 ± 9.28 kW/m 2 and THR of 54.03 ± 1.74 MJ/m 2 , with delayed ignition and a lower horizontal burning rate. Morphological support for the proposed condensed-phase protective mechanism was obtained from SEM analysis of the post-flammability residues. A cylindrical prototype was fabricated as a proof-of-concept demonstration of the feasibility of forming the composite into a conduit-like geometry, with a length of 300 mm and a wall thickness of 3 mm .
No takes yet. Share an insight, caveat, or question.
Velmurugan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: