Answers are grounded in this paper and cite their sources.
This study focuses on Al-3.44Cu-0.80Mg-0.42Ag alloy thin sheets, aiming to systematically elucidate the evolution patterns of its mechanical properties, the corresponding microstructural evolution characteristics, and the quantitative contributions of various strengthening phases. Vickers hardness, tensile, and tear tests were employed to assess the mechanical properties at different aging stages, while transmission electron microscopy (TEM) and convergent beam electron diffraction (CBED) were used to accurately measure the foil thickness, statistically determining the size, number density, and volume fraction of the precipitates. Additionally, X-ray diffraction (XRD) analysis was employed to study the evolution of dislocation density. The results indicate that during the initial aging stage (0–0.5 h), the hardness and strength of the alloy exhibited an anomalous decrease, followed by a gradual rise to a peak at 8 h, with a subsequent decrease during overaging state; conversely, the fracture toughness K IC decreased monotonically with extending aging time. Based on CBED for precise thickness measurement, the independent volume fractions of Ω, θ′, and S’ phases at peak aging and overaging states were quantitatively obtained. Considering the different interaction mechanisms between precipitates and dislocations, a synthesis calculation of strengthening increments was conducted using the superposition principle. The results show that the Ω phase contributes 91.36% of the total precipitation strengthening increment (Ω + θ′), serving as the primary strengthening phase; the theoretically predicted yield strength from the model shows good agreement with the experimental values, showing reasonable agreement with the experimental values under the investigated aging conditions.
No takes yet. Share an insight, caveat, or question.
Tian et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: